DSA100

DSA100

DSA100-1.jpg

Battery operated mobile signal level meter DSA100

(Click to enlarge)

DSA100 was designed to measure antenna outputs of digital terrestrial and satellite clusters of Japan.
Due to the shifting from analog to digital, more precise measurement of digital signals is required in the field.
DSA 100 measures level, CN value, BER value of digital terrestrial antennas as well as digital signal levels, CN value, BER value of satellites used in Japan including Digital BS, 110 degree CS, JCSAT3, JCSAT4.
It's a light weight, compact, battery-operated mobile signal leve meter ideal for on-site measurement. Measurement result can be saved in the device and transferred to PC for backup.
This easy-to-use device has built-in memory, LNB power source for satellite dish, LNB switching signal 42KHz, booster power for terrestrial antennas. DSA100 comes with a soft carry case attachable to poles while measuring.

Download useful manuals and applications regarding this product from HERELinkIcon

Product Overview

1. Supported TV signals

1) Digital Terrestrial

  UHF13 – UHF62 OFDM signal
  450MHz – 770MHz

2) Digital Satellite

  Digital, 110 degree CS, JCSAT3、JCSAT4 Satellites
  950MHz – 2150MHz


2. Supported Data Contents

1) Signal Strength

  40dBuV ~ 100dBuV

2) CN Value

  8dB ~ 32dB
3) MER Value

  8dB ~ 32dB

4) BER Value (Pre)

  2E-2 ~ 1E-8, 0E-0

     Ber value (Post) 

  2E-2 ~ 1E-8, 0E-0


3. Auto operation (particular specification)

1) LNB Power

   Auto switchable to 11.5V/14.5V while selecting satellites.

2) Twin LNB

  When 42KHz superimpose is needed, it is selected automatically when choosing satellites.
3) LNB channel selection

  Automatically picks up 10.678 GHz or 12.2 GHz for Digital BS, JCSAT-3, JCSAT-4 antenna's sectional oscillation when selecting satellites.

4) Auto-scan channels

  Automatically measures channel settings and saves in internal memory. 


4. Display

Display

  28 bit x 64 bit
  Black & White graphic LCD with back light

Screen Size

   W 55mm * H 28mm

5. Signal Input

F Connector

  Impedance 75Ω
  Swappable J-J connector used as terminal


6. Standard Channels

1) Digital Terrestrial

  Frequency 10 channels according to the location (5 pages available for setting)

2) Digital Satellite

   Choose from four satellites including BS Digital, 

   100 degree CS, JCSAT-3, and JCSAT4


7. Determining the signal quality

  DSA100 is configured with standard signal levels. When the measured signal reaches this level, you will see a "SMILE" on LCD display. Set up the antenna according to the result.


smilescreen.jpg

8. Bar chart for signal strength

  When determining which direction has the strongest signal to set up antennas, analog display might work better. This bar chart shows the signal strength of antennas.


graphscreen.jpg

9. USB interface

  USB interface is for PC connection. You can send and save the measuring results in PCs while download configurations from the internet and save it in DSA100 through the USB interface. In order to send the configuration to DSA100, you need to download and install  a software provided by us.


10. Specifications

1) ize / Weight

  886mm x 163mm x 43mm App. 350g (without batteries)

2) Power

  Four AA rechargeable batteries (Sanyo Eneloop 1900mAH) 
  (Alkaline batteries also can be used; however we do not recommend due to the high power consumption.)

IMPORTANT:
DSA100 is now upgraded to DSA200 with more powerful functions and performances.
Programs for DSA100 cannot be used with DSA200. Please use applications designed for each specific product.
Any questions, please contact HERE.